e28aa39b-4b64-4e21-9ce8-db64f8878c05Polybutadiene (PB) in waste incineration plantwaste-to-energy plant with dry flue gas treatment, without collection, transport and pre-treatmentproduction mix (region specific plants), at plant41.6 MJ/kg net calorific valueWaste to energyEnd-of-life treatmentEnergy recyclingThe modeled Waste-to-Energy plant (WtE) is defined based on the treatment of average municipal solid waste (MSW) in USA. The thermal treatment of a single waste fraction like paper or plastic or even specific wastes like Polyamide 6 is not done in reality in a WtE plant. The waste is always homogenized to obtain a relative constant calorific value and to comply with the emission standards. Nonetheless the used model and the used settings for the average MSW allows to attribute the environmental burden (emissions and also resource consumption of auxiliaries) energy production as well as the credits (metal scrap recovery) to a single fraction or specific waste incinerated within an average MSW. Therefore the LCI data is valid for the thermal treatment of the specific waste within an average MSW. The following technology description explains the settings and technology of the average WtE plant used to generate the LCI data set. The data set covers all relevant process steps for the thermal treatment and corresponding processes, such as disposal of air pollution control residues or metal recycling. The inventory is mainly based on industry data and is completed, where necessary, by secondary data. The system is partly terminated (open outputs electricity and steam). Electricity and steam flows has to be connected and adapted to local specificities in order to take into account these credits. Credits for recovered metals are already included.2801 ton of municipal solid wasteThe data set represents the US specific situation, focusing on the main technologies, the region specific characteristics and / or import statistics.Foreground system:
The concept of modern waste incineration is not only the incineration of the feedstock (in this case, municipal solid waste), but the generation of electricity and steam from the thermal energy produced from the combustion of the waste. The net calorific heat value of the waste is largely dependent on the composition of the waste; for instance, plastic has a much higher heat value than paper or yard trimmings do.
There are several overall MSWI (municipal solid waste incineration) plant technologies in the United States, but the most prevalent is the Mass Burn variety. In mass burn plants, the waste that is sent and delivered to the incinerator is burned "as-is," without removing any components past large pieces that would not fit in the incinerator (like large pieces of wood or parts of trees). The other major type of waste incineration plant is the RDF (refuse-derived fuel) type. In this type of incinerator the waste is checked first to remove any recyclable or non-combustible materials, then is shredded into small pieces and either incinerated directly afterward, or the shredded waste is then compressed into pellets and incinerated. As of 2010, 20% of the incinerator units in the United States are the RDF-type. However, most of these RDF incinerator units are small in scale, processing less than 250 tpd of trash. The model was therefore based upon the data from mass burn type incinerators, which represent over 90% of the large municipal waste incineration units in the United States.
When waste is brought to the incineration plant waste bunker, the trucks or trains that transport the waste are weighed before and after unloading in order to keep track of the amount of waste in the waste bunker. The bunker acts as a waste buffer and allows the plant operator to visually detect dangerous or incompatible materials that should be removed. A crane controlled by the plant operator mixes and then picks up some of the waste and drops the load into the furnace feeding unit. The relatively high temperature due to proximity to the furnace allows some of the water in the waste to evaporate before it enters the furnace, and this lower water content raises the heat value of the waste.
When the waste enters the furnace, the waste is heated to over 850˚C (usually around 1000˚C) by a combination of the combustion of waste and supplementary fuel (natural gas in US plants). This combustion is performed in the presence of excess air. Air temperatures are maintained above 850˚C in afterburning for at least 2 seconds to the amount of carbon monoxide. The walls of the furnace are lined with metal pipes filled with water. This configuration is known as a water wall furnace, and allows the thermal energy generated from the combustion of the waste in the furnace to transfer to the water in the pipes lining the inside of the unit. The amount of thermal energy generated from combustion is largely dependent on the composition of the combusted waste. Ashes and metals resulting from the combustion process are collected, and separated in the bottom ash discharger. The ashes are cooled down with water to prevent them reaching their melting point between 950 and 1000°C. At the exit, the water used for cooling is separated from the grate ash and may be re-circulated. The heat generated from the burning waste is used in the boiler to superheat the water pipes into steam. The steam is super-heated and can be then utilized to generate electricity. The super-heated steam is utilized to move a turbine generator to generate electricity. After passing through the generator, the steam is cooled down and condenses to a liquid form to start the process again. Finally, the flue gas produced from combustion is filtered to remove air pollutants. Steps include baghouse filtering, which mainly removes non-active particulates in the gas, scrubbing with lime, which removes much of the acidic components of the gas, NOx removal, which in the United States is performed by using ammonia or urea in SNCR (Selective Non-Catalytic Reduction), and treatment with activated carbon, which removes much of the other contaminants in the gas.
Materials reacting exothermic in the incineration plant lead to energy generation (electricity and steam OUTput).
Materials reacting endothermic in the incineration plant lead to energy consumption (electricity and steam INput).
Background system:
Electricity: Electricity from renewable and non- renewable powerplants is modelled so that it represents a country’s specific consumption mix including transmission / distribution losses, own consumption, imports, emissions and efficiency standards, and energy carrier properties. Several factors are taken into account. (1) Energy carrier production - The exploration, mining / production, processing, and transportation of energy carrier supply chains are modelled for each country. The models account for differences among countries in production and processing, including crude oil production technologies, flaring rates, production efficiencies, emissions, etc. (2) Energy carrier supply - Each country’s specific energy carrier supply is modelled, taking into account domestic supply versus imports from abroad. Energy carrier properties (e.g. carbon and energy content), which can vary depending from where an energy carrier is sourced, are adjusted accordingly. (3) Power plants - Models are created to represent energy carrier-specific power plants and electricity generation facilities specific to different renewable energy resources. Energy carrier production and supply models are used to represent power plant inputs. Combined heat and power (CHP) plants are also considered. (4) Electricity grid - Models representing the electricity generation facilities are combined into a larger model that reflects a country’s consumption mix. The larger model accounts for a country’s production mix, internal consumption (e.g. pumped storage for hydro power), transmission / distribution losses, and imported electricity. The country model is also adjusted according to national power plant emission and efficiency standards, as well as the country’s share of electricity plants versus CHP facilities.
Thermal energy, process steam: The thermal energy and process steam supply is modelled to reflect each country’s emission standards and typical energy carriers (e.g., coal, natural gas, etc.) Both thermal energy and process steam are assumed to be produced at heat plants. Thermal energy datasets assume energy carrier inputs are converted to thermal energy with 100% efficiency; process steam datasets assume conversion efficiencies of 85%, 90% to 95%. The energy carriers used for the generation of thermal energy and process steam are modelled according to each country’s import situation (see electricity above).
Transportation: All relevant and known transportation processes are included. Ocean-going and inland ship transport as well as rail, truck and pipeline transport of bulk commodities are considered.
Energy carriers: The energy carriers and their respective properties are modelled according to the specific supply situation (see electricity above).
Refinery products: Diesel fuel, gasoline, technical gases, fuel oils, lubricants and residues such as bitumen are modelled with a parameterised country-specific refinery model. The refinery model aims to represent each country’s refining processes (e.g. emissions levels, internal energy consumption, etc.), as well as the country’s product output spectrum, which can vary significantly among countries. The supply of crude oil is likewise modelled according to the country-specific situation and accounts for differences in resource properties (e.g., crude oil energy content).Waste incineration is used throughout Europe and to a somewhat lesser exent in the United States as a form of waste management and energy production. The slag and ashes produced from incineration of municipal solid waste is about 25% of the volume of the original waste, which saves space in landfills. The ash can also be used in roadbeds or as landfill covering material. In the US, electricity is the main energy product, although steam is produced in some CHP plants for use in locations near those plants.End-of-life_incineration_flowchart_2008End-of-life_incineration_pb_compositionThe model is build for the described technology and verified with measured data from several European incinerators and further literature data. The heating value of the input is calculated based on the elementary specification of the input. The material flow in the plant is calculated using individual transfer coefficients for every element and stage of the incinerator. An exception are the emission of some substances and heavy metals into the air listed in the table "Used emission values for the flue gas after FGT" above. For the input specification in the model the following elements and compounds are addressed: Ag, Al, AlOx, As, ash, Ba, Br, C (fossil, biogenic, inorganic), Ca, Cd, Cl, CN, Co, Cr, Cu, F, Fe, H, H2O, Hg, J, K, Mg, Mn, N, Na, NH4, Ni, O, P, Pb, S, Sb, SiO2, Sn, SO4, Ti, Tl, V, Zn. The modeled emissions to air in the flue gas of the incinerator are: As, Ba, Cd, Co, CO, CO2, Cr, Cu, dioxins, HBr, HCl, HF, HJ, Hg, Mn, N2O, NH3, Ni, NMVOC, NOx, particles, Pb, Sb, Sn, SO2, Tl, V, Zn. In addition slag, boiler and filter ash and recycled metals are modeled. The transfer of the elements and substances into the different mediums (bottom ash, APC residues and air) is done with transfer coefficients based on real plant data, literature and experts. Some of the elements respectively tracked substances leaving the system are input dependent. That means there is a stoichiometrical correlation between input and output. For other input the relations are depending on the used technology. The output of these substances are a function of the used technology and therefore independent of the specific input. Input dependent parameters are for example the input of C, H, Cl, F, S, N and metals and the emissions caused by these elements. The amount of slag, boiler and filter ash produced is also input dependent. Technology dependent parameters are for example CO, VOC and dioxin emissions, use of adsorbent and the composition of slag, boiler and filter ash.Partly terminated systemAttributionalNoneAllocation - market valueAllocation - net calorific valueAllocation - exergetic contentAllocation - element contentAllocation - massEmissions and also credits for metals are allocated based on the settings for average MSW and the element content of the specific waste treated. A system expansion is used to account the credits for the ferrous metal recovery.
Background system (credits for electricity and thermal energy):
For the combined heat and power (CHP) production allocation by exergetic content is applied. Electricity and power plant by-products, i.e. gypsum, boiler ash and fly ash are allocated by market value due to no common physical properties. Within the refinery allocation by mass (refinery expenditures) and net calorific value (feedstocks, e.g.crude oil) is used. For the combined crude oil, natural gas and natural gas liquids (NGL) production allocation by net calorific value is applied.All data used in the calculation of the LCI results refer to net calorific value.NoneGaBi Modelling PrinciplesGaBi Water Modelling PrinciplesGaBi Agriculture Model DocumentationGaBi Land Use Change Model DocumentationGaBi Energy Modelling PrinciplesGaBi Refinery Modelling PrinciplesAll elements available in the model as input parameters are specified for the incineration good and therefore included. Cut-off rules for each unit process: Coverage of at least 95% of mass and energy of the input and output flows, and 98% of their environmental relevance (according to expert judgment).NoneThe transfer coefficients for the elements (used to allocate the different elements and substances to the different mediums air, bottom ash, air pollution control residues) and the energy and utility consumption of the waste-to-energy plant are determined based on industry data (real plant data) and a comprehensive literature research. LCI modeling is fully consistent.NoneThe transfer coefficients of some heavy metals are extrapolated from elements with comparable behavior.NoneWaste-to-Energy Residues - The Search for Beneficial UsesWTERT - Flue Gas CleaningEPA - 2008 National Emissions InventoryEPA - Inventory of U.S. Greenhouse Gas Emissions 1990-2010World Bank - Municipal Solid Waste Incineration2010 ERC Directory of Waste-to-Energy PlantsBenchmarking Mass Burn WTE Facility Performance: How Does Your Facility Measure Up?95.0noneThe data set represents an end of-life inventory for the thermal treatment of a specific waste fraction in an average Waste-to-Energy (WtE) plant with dry flue gas cleaning. The data set includes the emissions and resource consumption for the thermal treatment of waste. The behavior of bottom ash and air pollution control residues on a landfill are considered. Credits for recovered metals are included. Produced electricity and process steam are unconnected (partly terminated). Electricity and steam flows has to be connected and adapted to local specificities in order to take into account these credits. It should be considered that this data set is an approximation to reality. The used model of an average US WtE plant and the average composition of MSW do not exist in reality and efficiencies, emission values, transfer coefficients and elementary composition will differ if a specific WtE plant is used. This data set can be used for the incineration of the mentioned and specified waste.No statementAnthropogenic Abiotic Depletion Potential (AADP), TU BerlinCML2001 - Jan. 2016, Abiotic Depletion (ADP elements)CML2001 - Jan. 2016, Abiotic Depletion (ADP fossil)CML2001 - Jan. 2016, Acidification Potential (AP)CML2001 - Jan. 2016, Eutrophication Potential (EP)CML2001 - Jan. 2016, Freshwater Aquatic Ecotoxicity Pot. (FAETP inf.)CML2001 - Jan. 2016, Global Warming Potential (GWP 100 years)CML2001 - Jan. 2016, Global Warming Potential (GWP 100 years), excl biogenic carbonCML2001 - Jan. 2016, Human Toxicity Potential (HTP inf.)CML2001 - Jan. 2016, Marine Aquatic Ecotoxicity Pot. (MAETP inf.)CML2001 - Jan. 2016, Ozone Layer Depletion Potential (ODP, steady state)CML2001 - Jan. 2016, Photochem. Ozone Creation Potential (POCP)CML2001 - Jan. 2016, Terrestric Ecotoxicity Potential (TETP inf.)CML2001 - Jan. 2016, Global Warming Potential (GWP 100), excl bio. C, incl LUC, no norm/weightCML2001 - Jan. 2016, Global Warming Potential (GWP 100), incl bio. C, incl LUC, no norm/weightCML2001 - Jan. 2016, Global Warming Potential (GWP 100), Land Use Change only, no norm/weightCML2001 - Jan. 2016, Abiotic Depletion (ADP elements), Economic ReserveCML2001 - Jan. 2016, Abiotic Depletion (ADP elements), Reserve BaseEF-Acidification terrestrial and freshwaterEF-Cancer human health effectsEF-Climate ChangeEF-Ecotoxicity freshwaterEF-Eutrophication freshwaterEF-Eutrophication marineEF-Eutrophication terrestrialEF-Ionising radiation - human healthEF-Land UseEF-Non-cancer human health effectsEF-Ozone depletionEF-Photochemical ozone formation - human healthEF-Resource use, energy carriersEF-Resource use, mineral and metalsEF-Respiratory inorganicsEF-water scarcityReCiPe 2016 v1.1 Midpoint (E) - Terrestrial ecotoxicityReCiPe 2016 v1.1 Midpoint (E) - Freshwater ecotoxicityReCiPe 2016 v1.1 Midpoint (E) - Marine ecotoxicityReCiPe 2016 v1.1 Midpoint (E) - Human toxicity, non-cancerReCiPe 2016 v1.1 Midpoint (E) - Human toxicity, cancerReCiPe 2016 v1.1 Midpoint (E) - Climate change, incl biogenic carbonReCiPe 2016 v1.1 Midpoint (E) - Climate change, default, excl biogenic carbonReCiPe 2016 v1.1 Midpoint (E) - Metal depletionReCiPe 2016 v1.1 Midpoint (E) - Photochemical Ozone Formation, Human HealthReCiPe 2016 v1.1 Midpoint (E) - Photochemical Ozone Formation, EcosystemsReCiPe 2016 v1.1 Midpoint (E) - Fossil depletionReCiPe 2016 v1.1 Midpoint (E) - Freshwater ConsumptionReCiPe 2016 v1.1 Midpoint (E) - Stratospheric Ozone DepletionReCiPe 2016 v1.1 Midpoint (E) - Fine Particulate Matter FormationReCiPe 2016 v1.1 Midpoint (E) - Terrestrial AcidificationReCiPe 2016 v1.1 Midpoint (E) - Ionizing RadiationReCiPe 2016 v1.1 Midpoint (E) - Freshwater EutrophicationReCiPe 2016 v1.1 Midpoint (E) - Land useReCiPe 2016 v1.1 Midpoint (E) - Marine EutrophicationReCiPe 2016 v1.1 Midpoint (E) - Climate change, excl biog. C, incl LUC, no norm/weightReCiPe 2016 v1.1 Midpoint (E) - Climate change, incl biog. C, incl LUC, no norm/weightReCiPe 2016 v1.1 Endpt(E) - Climate change Terrest Ecosystems, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(E) - Climate change Human Health, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(E) - Climate change Freshw Ecosystems, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(E) - Climate change Terrest Ecosystems, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(E) - Climate change Human Health, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(E) - Climate change Freshw Ecosystems, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(E) - Climate change Freshw Ecosystems, LUC only, no norm/weightReCiPe 2016 v1.1 Endpt(E) - Climate change Human Health, LUC only, no norm/weightReCiPe 2016 v1.1 Midpoint (E) - Climate change, LUC only, no norm/weightReCiPe 2016 v1.1 Endpt(E) - Climate change Terrest Ecosystems, LUC only, no norm/weightReCiPe 2016 v1.1 Endpoint (E) - Terrestrial ecotoxicityReCiPe 2016 v1.1 Endpoint (E) - Freshwater ecotoxicityReCiPe 2016 v1.1 Endpoint (E) - Marine ecotoxicityReCiPe 2016 v1.1 Endpoint (E) - Human toxicity, non-cancerReCiPe 2016 v1.1 Endpoint (E) - Human toxicity, cancerReCiPe 2016 v1.1 Endpoint (E) - Climate change Freshw Ecosystems, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (E) - Climate change Human Health, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (E) - Climate change Terrest Ecosystems, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (E) - Climate change Terrest Ecosystems, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (E) - Climate Change Human Health, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (E) - Climate change Freshw Ecosystems, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (E) - Metal depletionReCiPe 2016 v1.1 Endpoint (E) - Photochemical Ozone Formation, Human HealthReCiPe 2016 v1.1 Endpoint (E) - Photochemical Ozone Formation, EcosystemsReCiPe 2016 v1.1 Endpoint (E) - Fossil depletionReCiPe 2016 v1.1 Endpoint (E) - Freshwater Consumption, Human HealthReCiPe 2016 v1.1 Endpoint (E) - Freshwater Consumption, Terrest EcosystemsReCiPe 2016 v1.1 Endpoint (E) - Freshwater Consumption, Freshw EcosystemsReCiPe 2016 v1.1 Endpoint (E) - Stratospheric Ozone DepletionReCiPe 2016 v1.1 Endpoint (E) - Fine Particulate Matter FormationReCiPe 2016 v1.1 Endpoint (E) - Terrestrial AcidificationReCiPe 2016 v1.1 Endpoint (E) - Ionizing RadiationReCiPe 2016 v1.1 Endpoint (E) - Freshwater EutrophicationReCiPe 2016 v1.1 Endpoint (E) - Land useReCiPe 2016 v1.1 Endpoint (E) - Marine EutrophicationReCiPe 2016 v1.1 Midpoint (H) - Terrestrial ecotoxicityReCiPe 2016 v1.1 Midpoint (H) - Freshwater ecotoxicityReCiPe 2016 v1.1 Midpoint (H) - Marine ecotoxicityReCiPe 2016 v1.1 Midpoint (H) - Human toxicity, non-cancerReCiPe 2016 v1.1 Midpoint (H) - Human toxicity, cancerReCiPe 2016 v1.1 Midpoint (H) - Climate change, default, excl biogenic carbonReCiPe 2016 v1.1 Midpoint (H) - Climate change, incl biogenic carbonReCiPe 2016 v1.1 Midpoint (H) - Metal depletionReCiPe 2016 v1.1 Midpoint (H) - Photochemical Ozone Formation, Human HealthReCiPe 2016 v1.1 Midpoint (H) - Photochemical Ozone Formation, EcosystemsReCiPe 2016 v1.1 Midpoint (H) - Fossil depletionReCiPe 2016 v1.1 Midpoint (H) - Freshwater ConsumptionReCiPe 2016 v1.1 Midpoint (H) - Stratospheric Ozone DepletionReCiPe 2016 v1.1 Midpoint (H) - Fine Particulate Matter FormationReCiPe 2016 v1.1 Midpoint (H) - Terrestrial AcidificationReCiPe 2016 v1.1 Midpoint (H) - Ionizing RadiationReCiPe 2016 v1.1 Midpoint (H) - Freshwater EutrophicationReCiPe 2016 v1.1 Midpoint (H) - Land useReCiPe 2016 v1.1 Midpoint (H) - Marine EutrophicationReCiPe 2016 v1.1 Midpoint (H) - Climate change, excl biog. C, incl LUC, no norm/weightReCiPe 2016 v1.1 Endpt(H) - Climate change Terrest Ecosystems, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(H) - Climate change Human Health, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(H) - Climate change Freshw Ecosystems, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Midpoint (H) - Climate change, incl biog. C, incl LUC, no norm/weightReCiPe 2016 v1.1 Endpt(H) - Climate change Terrest Ecosystems, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(H) - Climate change Human Health, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(H) - Climate change Freshw Ecosystems, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(H) - Climate change Freshw Ecosystems, LUC only, no norm/weightReCiPe 2016 v1.1 Endpt(H) - Climate change Human Health, LUC only, no norm/weightReCiPe 2016 v1.1 Midpoint (H) - Climate change, LUC only, no norm/weightReCiPe 2016 v1.1 Endpt(H) - Climate change Terrest Ecosystems, LUC only, no norm/weightReCiPe 2016 v1.1 Endpoint (H) - Terrestrial ecotoxicityReCiPe 2016 v1.1 Endpoint (H) - Freshwater ecotoxicityReCiPe 2016 v1.1 Endpoint (H) - Marine ecotoxicityReCiPe 2016 v1.1 Endpoint (H) - Human toxicity, non-cancerReCiPe 2016 v1.1 Endpoint (H) - Human toxicity, cancerReCiPe 2016 v1.1 Endpoint (H) - Climate change Freshw Ecosystems, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (H) - Climate change Human Health, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (H) - Climate change Terrest Ecosystems, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (H) - Climate change Terrest Ecosystems, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (H) - Climate change Human Health, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (H) - Climate change Freshw Ecosystems, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (H) - Metal depletionReCiPe 2016 v1.1 Endpoint (H) - Photochemical Ozone Formation, Human HealthReCiPe 2016 v1.1 Endpoint (H) - Photochemical Ozone Formation, EcosystemsReCiPe 2016 v1.1 Endpoint (H) - Fossil depletionReCiPe 2016 v1.1 Endpoint (H) - Freshwater Consumption, Human HealthReCiPe 2016 v1.1 Endpoint (H) - Freshwater Consumption, Terrest EcosystemsReCiPe 2016 v1.1 Endpoint (H) - Freshwater Consumption, Freshw EcosystemsReCiPe 2016 v1.1 Endpoint (H) - Stratospheric Ozone DepletionReCiPe 2016 v1.1 Endpoint (H) - Fine Particulate Matter FormationReCiPe 2016 v1.1 Endpoint (H) - Terrestrial AcidificationReCiPe 2016 v1.1 Endpoint (H) - Ionizing RadiationReCiPe 2016 v1.1 Endpoint (H) - Freshwater EutrophicationReCiPe 2016 v1.1 Endpoint (H) - Land useReCiPe 2016 v1.1 Endpoint (H) - Marine EutrophicationReCiPe 2016 v1.1 Midpoint (I) - Terrestrial ecotoxicityReCiPe 2016 v1.1 Midpoint (I) - Freshwater ecotoxicityReCiPe 2016 v1.1 Midpoint (I) - Marine ecotoxicityReCiPe 2016 v1.1 Midpoint (I) - Human toxicity, non-cancerReCiPe 2016 v1.1 Midpoint (I) - Climate change, default, excl biogenic carbonReCiPe 2016 v1.1 Midpoint (I) - Climate change, incl biogenic carbonReCiPe 2016 v1.1 Midpoint (I) - Metal depletionReCiPe 2016 v1.1 Midpoint (I) - Photochemical Ozone Formation, Human HealthReCiPe 2016 v1.1 Midpoint (I) - Photochemical Ozone Formation, EcosystemsReCiPe 2016 v1.1 Midpoint (I) - Fossil depletionReCiPe 2016 v1.1 Midpoint (I) - Human toxicity, cancerReCiPe 2016 v1.1 Midpoint (I) - Freshwater ConsumptionReCiPe 2016 v1.1 Midpoint (I) - Stratospheric Ozone DepletionReCiPe 2016 v1.1 Midpoint (I) - Fine Particulate Matter FormationReCiPe 2016 v1.1 Midpoint (I) - Terrestrial AcidificationReCiPe 2016 v1.1 Midpoint (I) - Ionizing RadiationReCiPe 2016 v1.1 Midpoint (I) - Freshwater EutrophicationReCiPe 2016 v1.1 Midpoint (I) - Land useReCiPe 2016 v1.1 Midpoint (I) - Marine EutrophicationReCiPe 2016 v1.1 Midpoint (I) - Climate change, excl biog. C, incl LUC, no norm/weightReCiPe 2016 v1.1 Endpt(I) - Climate change Terrest Ecosystems, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(I) - Climate change Human Health, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(I) - Climate change Freshw Ecosystems, excl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Midpoint (I) - Climate change, incl biog. C, incl LUC, no norm/weightReCiPe 2016 v1.1 Endpt(I) - Climate change Terrest Ecosystems, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(I) - Climate change Human Health, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(I) - Climate change Freshw Ecosystems, incl biog. C, incl LUC, no norm/weighReCiPe 2016 v1.1 Endpt(I) - Climate change Freshw Ecosystems, LUC only, no norm/weightReCiPe 2016 v1.1 Endpt(I) - Climate change Human Health, LUC only, no norm/weightReCiPe 2016 v1.1 Midpoint (I) - Climate change, LUC only, no norm/weightReCiPe 2016 v1.1 Endpt(I) - Climate change Terrest Ecosystems, LUC only, no norm/weightReCiPe 2016 v1.1 Endpoint (I) - Terrestrial ecotoxicityReCiPe 2016 v1.1 Endpoint (I) - Freshwater ecotoxicityReCiPe 2016 v1.1 Endpoint (I) - Marine ecotoxicityReCiPe 2016 v1.1 Endpoint (I) - Human toxicity, non-cancerReCiPe 2016 v1.1 Endpoint (I) - Climate change Freshw Ecosystems, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (I) - Climate change Human Health, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (I) - Climate change Terrest Ecosystems, default, excl biogenic carbonReCiPe 2016 v1.1 Endpoint (I) - Climate change Terrest Ecosystems, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (I) - Climate change Human Health, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (I) - Climate change Freshw Ecosystems, incl biogenic carbonReCiPe 2016 v1.1 Endpoint (I) - Metal depletionReCiPe 2016 v1.1 Endpoint (I) - Photochemical Ozone Formation, Human HealthReCiPe 2016 v1.1 Endpoint (I) - Photochemical Ozone Formation, EcosystemsReCiPe 2016 v1.1 Endpoint (I) - Fossil depletionReCiPe 2016 v1.1 Endpoint (I) - Human toxicity, cancerReCiPe 2016 v1.1 Endpoint (I) - Freshwater Consumption, Human HealthReCiPe 2016 v1.1 Endpoint (I) - Freshwater Consumption, Terrest EcosystemsReCiPe 2016 v1.1 Endpoint (I) - Freshwater Consumption, Freshw EcosystemsReCiPe 2016 v1.1 Endpoint (I) - Stratospheric Ozone DepletionReCiPe 2016 v1.1 Endpoint (I) - Fine Particulate Matter FormationReCiPe 2016 v1.1 Endpoint (I) - Terrestrial AcidificationReCiPe 2016 v1.1 Endpoint (I) - Ionizing RadiationReCiPe 2016 v1.1 Endpoint (I) - Freshwater EutrophicationReCiPe 2016 v1.1 Endpoint (I) - Land useReCiPe 2016 v1.1 Endpoint (I) - Marine EutrophicationIPCC AR5 GWP20, incl biogenic carbonIPCC AR5 GWP100, incl biogenic carbonIPCC AR5 GTP50, incl biogenic carbonIPCC AR5 GTP20, incl biogenic carbonIPCC AR5 GTP100, incl biogenic carbonIPCC AR5 GTP20, Land Use Change only, no norm/weightIPCC AR5 GTP20, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP50, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP100, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP100, Land Use Change only, no norm/weightIPCC AR5 GTP100, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP50, Land Use Change only, no norm/weightIPCC AR5 GTP100, Land Use Change only, no norm/weightIPCC AR5 GWP20, Land Use Change only, no norm/weightIPCC AR5 GWP20, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP20, excl biogenic carbonIPCC AR5 GTP20, excl biogenic carbonIPCC AR5 GWP100, excl biogenic carbonIPCC AR5 GTP50, excl biogenic carbonIPCC AR5 GTP100, excl biogenic carbonIPCC AR5 GWP20, Land Use Change only, no norm/weightIPCC AR5 GTP100, Land Use Change only, no norm/weightIPCC AR5 GWP100, Land Use Change only, no norm/weightIPCC AR5 GWP100, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP20, Land Use Change only, no norm/weightIPCC AR5 GWP20, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP100, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP50, Land Use Change only, no norm/weightIPCC AR5 GTP50, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP20, excl biogenic carbon, incl Land Use Change, no norm/weightBiotic Production Loss Potential (Occupation)Biotic Production Loss Potential (Transformation)Erosion Potential (Occupation)Erosion Potential (Transformation)Groundwater Regeneration Reduction Potential (Occupation)Groundwater Regeneration Reduction Potential (Transformation)Infiltration Reduction Potential (Occupation)Infiltration Reduction Potential (Transformation)Physicochemical Filtration Reduction Potential (Occupation)Physicochemical Filtration Reduction Potential (Transformation)TRACI 2.1, Global Warming Air, incl. biogenic carbonTRACI 2.1, Resources, Fossil fuelsTRACI 2.1, Human toxicity, cancer (recommended)TRACI 2.1, Human toxicity, non-canc. (recommended)TRACI 2.1, Global Warming Air, excl. biogenic carbonTRACI 2.1, Smog AirTRACI 2.1, Ecotoxicity (recommended)TRACI 2.1, AcidificationTRACI 2.1, EutrophicationTRACI 2.1, Human Health Particulate AirTRACI 2.1, Ozone Depletion AirTRACI 2.1, Global Warming Air, excl biogenic carbon, incl LUC, no norm/weightTRACI 2.1, Global Warming Air, LUC only, no norm/weightTRACI 2.1, Global Warming Air, incl biogenic carbon, incl LUC, no norm/weightUBP 2013, Carcinogenic substances into airUBP 2013, Energy resourcesUBP 2013, Global warmingUBP 2013, Heavy metals into airUBP 2013, Heavy metals into soilUBP 2013, Heavy metals into waterUBP 2013, Land useUBP 2013, Main air pollutantsUBP 2013, Mineral resourcesUBP 2013, Non radioactive waste to depositUBP 2013, Ozone layer depletionUBP 2013, Pesticides into soilUBP 2013, POP into waterUBP 2013, Radioactive substances into airUBP 2013, Radioactive substances into waterUBP 2013, Radioactive waste to depositUBP 2013, Water pollutantsUBP 2013, Water resourcesUBP 2013, Global warming, incl Land Use ChangeUBP 2013, Global warming, Land Use Change onlyUSEtox 2.1, Ecotoxicity (recommended and interim)USEtox 2.1, Ecotoxicity (recommended only)USEtox 2.1, Human toxicity, cancer (recommended and interim)USEtox 2.1, Human toxicity, cancer (recommended only)USEtox 2.1, Human toxicity, non-canc. (recommended and interim)USEtox 2.1, Human toxicity, non-canc. (recommended only)AWARE, high characterization factor for unspecified waterAWARE, low characterization factor for unspecified waterAWARE, OECD+BRIC average for unspecified waterBlue water consumptionBlue water useTotal freshwater consumption (including rainwater)Total freshwater useWSI, high characterization factor for unspecified waterWSI, low characterization factor for unspecified waterWSI, OECD+BRIC average for unspecified waterAWARE (excl hydropower), high characterization factor for unspecified waterAWARE (excl hydropower), low characterization factor for unspecified waterAWARE (excl hydropower), OECD+BRIC average for unspecified waterBlue water consumption (excl hydropower)Blue water use (excl hydropower)Total freshwater consumption (excl hydropower, including rainwater)Total freshwater use (excl hydropower)WSI (excl hydropower), high characterization factor for unspecified waterWSI (excl hydropower), low characterization factor for unspecified waterWSI (excl hydropower), OECD+BRIC average for unspecified waterThe LCI method applied is in compliance with ISO 14040 and 14044. The documentation includes all relevant information in view of the data quality and scope of the application of the respective LCI result / data set. The dataset represents the state-of-the-art in view of the referenced functional unit.thinkstepIABP-GaBiIBP-GaBiOverall quality according to different validation schemes
GaBi = 1,8 interpreted into "good overall quality" in the GaBi quality validation scheme
ILCD = 1,9 interpreted into "basic overall quality" in the ILCD quality validation scheme
PEF = 1,8 interpreted into "very good overall quality" in the PEF quality validation schemeThe dataset and systems, which are provided with our software and databases for public use into a broad user community, are constantly used, compared, benchmarked, screened, reviewed and results published in various external, professional and third party LCA applications in industry, academia and politics. So user feedback via the online GaBi forum or direct via user information is a standard routine in the maintenance and update process and leads to stable quality and constant control and improvement of data, if knowledge or technology improves or industrial process chains develop or change.GaBi user forumGaBi bug forumGaBi user communityGaBi conformity systemFully compliantFully compliantFully compliantFully compliantFully compliantNot definedUNEP SETAC Life Cycle InitiativeNot definedNot definedNot definedNot definedNot definedNot definedILCD Data Network - Entry-levelNot definedFully compliantFully compliantNot definedFully compliantNot definedthinkstepThe data set represents a cradle to gate inventory. LCI dataset for life cycle assessments of the systems involving electricity and/or steam generation from the incineraion od municipal solid waste.thinkstep2019-02-01T00:00:00.000ILCD format 1.1thinkstepNo official approval by producer or operator2019-02-01T00:00:00.00000.00.001Data set finalised; entirely publishedGaBi databasesthinksteptrueOtherGaBi (source code, database including extension modules and single data sets, documentation) remains property of thinkstep AG. thinkstep AG delivers GaBi licenses comprising data storage medium and manual as ordered by the customer. The license guarantees the right of use for one installation of GaBi. Further installations using the same license are not permitted. Additional licenses are only valid if the licensee holds at least one main license. Licenses are not transferable and must only be used within the licensee's organisation. Data sets may be copied for internal use. The number of copies is restricted to the number of licenses of the software system GaBi the licensee owns. The right of use is exclusively valid for the licensee. All rights reserved.Incineration goodInput1000.01000.00Mixed primary / secondaryUnknown derivationvaluable